КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ ДИЗЕЛЬНОГО ДВИГАТЕЛЯ СНЯТИЕ

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь

  3. REMOVE NO. 3 AIR HOSE

    Click here Нажмите здесь

  4. REMOVE NO. 2 AIR TUBE ASSEMBLY

    1. Disconnect the connector.

      A012MA2

    2. Remove the 2 bolts.

    3. Loosen the 2 hose clamps and remove the No. 2 air tube assembly.

  5. REMOVE DIESEL THROTTLE BODY ASSEMBLY

    1. Disconnect the 2 connectors.

      A012G8R

    2. Remove the nut.

      A012KMK

    3. Disengage the wire harness clamp, and separate the wire harness.

    4. Remove the 4 bolts, diesel throttle body assembly, gasket and wire harness bracket.

      A012G5E