ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ

CAUTION / NOTICE / HINT

Tip:

Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than the other belts with a PET (polyester) or PEN (polyethylene naphthalate) core.

PROCEDURE

  1. REMOVE FRONT WHEEL RH

  2. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    1. Remove the 6 bolts, 7 clips and No. 1 engine under cover.

  3. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    1. Remove the 6 bolts, 11 clips and No. 1 engine under cover.

  4. REMOVE REAR ENGINE UNDER COVER RH

    Click hereНажмите здесь

  5. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click hereНажмите здесь

  6. REMOVE V-RIBBED BELT

    1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner assembly.

      A012G2L
    2. While turning the V-ribbed belt tensioner assembly counterclockwise, align the holes, and then insert a 5 mm hexagon wrench into the holes to fix the V-ribbed belt tensioner assembly.

      A012FXZC02
      *a 5 mm Hexagon Wrench