CAUTION / NOTICE / HINT
Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than the other belts with a PET (polyester) or PEN (polyethylene naphthalate) core.
PROCEDURE
INSTALL V-RIBBED BELT
Install the V-ribbed belt as shown in the illustration.
*A | w/o Air Conditioner System | *B | w/ Air Conditioner System |
*1 | Tensioner | *2 | Crankshaft |
*3 | Water Pump | *4 | Generator |
*5 | A/C Compressor | - | - |
Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.
INSPECT V-RIBBED BELT
Click hereНажмите здесь
INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)
Click hereНажмите здесь
INSTALL REAR ENGINE UNDER COVER RH
Click hereНажмите здесь
INSTALL NO. 1 ENGINE UNDER COVER (for Half Cover Type)
Install the No. 1 engine under cover with the 6 bolts and 7 clips.
INSTALL NO. 1 ENGINE UNDER COVER (for Full Cover Type)
Install the No. 1 engine under cover with the 6 bolts and 11 clips.
INSTALL FRONT WHEEL RH