ДАТЧИК ОБОРОТОВ ТРАНСМИССИИ УСТАНОВКА

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR

   Coat a new O-ring with MP grease.

   Install the O-ring to the transmission revolution sensor.

   Install the transmission revolution sensor with the bolt.

   

   Момент затяжки

   7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

   Connect the transmission revolution sensor connector.

   

   Connect the wire harness clamp.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here Нажмите здесь

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click hereНажмите здесь

4. INSTALL BATTERY

   Click here Нажмите здесь

5. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   Click here Нажмите здесь

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here Нажмите здесь