ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE

  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click hereНажмите здесь

  2. REMOVE MANIFOLD SUPPORT BRACKET

    Click here Нажмите здесь

  3. REMOVE CYLINDER BLOCK SIDE COVER

    Click here Нажмите здесь

  4. REMOVE MANIFOLD STAY

    1. Remove the 2 bolts and manifold stay.

      A012FCB

  5. REMOVE CRANK POSITION SENSOR

    1. Disconnect the connector from the crank position sensor.

      A012LGP

    2. Disengage the crank position sensor connector wire harness clamp from the wire harness bracket.

    3. Remove the 2 bolts and the crank position sensor.