ДАТЧИК ВЫБОРА ПЕРЕДАЧ СНЯТИЕ

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here Нажмите здесь

  2. REMOVE FUEL FILTER ASSEMBLY

    Click hereНажмите здесь

  3. DISCONNECT ENGINE WIRE

    Click hereНажмите здесь

  4. REMOVE FUEL FILTER SUPPORT

    Click here Нажмите здесь

  5. REMOVE AIR CLEANER BRACKET

    Click here Нажмите здесь

  6. REMOVE SELECT STROKE SENSOR

    1. Disconnect the 2 wire harness clamps.

      A012LJD
    2. Disconnect the select stroke sensor connector.

      A012MKX
    3. Remove the 2 screws and select stroke sensor from the shift and select actuator.

      A012KU8
    4. Remove the O-ring from the select stroke sensor.