ГИДРОАККУМУЛЯТОР ПРИВОДА СЦЕПЛЕНИЯ (для EC69) СНЯТИЕ

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereНажмите здесь

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click hereНажмите здесь

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click hereНажмите здесь

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereНажмите здесь

  5. REMOVE BATTERY

    Click hereНажмите здесь

  6. REMOVE NO. 2 BATTERY CARRIER

    Click hereНажмите здесь

  7. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

    1. Remove the bolt and separate the clutch line clamp (A) from the manual transaxle assembly.

      A012MZXN01
    2. Using a 10 mm union nut wrench, remove the bleeder to accumulator tube and accumulator to flexible hose tube (B).

      Tip:

      Use a container to collect the fluid.

    3. Remove the clip and separate the clutch hose (C).

    4. Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.

      A012I3N