PROCEDURE
INSPECT V-RIBBED BELT
Check the V-ribbed belt for wear, cracks or other signs of damage.
If any of the following defects is found, replace the V-ribbed belt.
The belt is cracked.
The belt is worn out to the extent that the cords are exposed.
The belt has chunks missing from the ribs.
Check that the V-ribbed belt fits properly in the ribbed grooves.
*a | Correct |
*b | Incorrect |
Check with your hand to confirm that the V-ribbed belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.