КОРПУС ДИФФЕРЕНЦИАЛА ПОВТОРНАЯ СБОРКА

PROCEDURE

  1. INSTALL FRONT DIFFERENTIAL SIDE GEAR

    1. Coat the contact surfaces of the front differential side gears with gear oil.

    2. Install the 2 front No. 1 differential side gear thrust washers onto the 2 front differential side gears.

    3. Install the 2 front differential side gears, 2 front differential pinions, and 2 front differential pinion thrust washers to the front differential case.

      A012KNJ
      Tip:

      While rotating the front differential side gears, install the 2 front differential pinions and 2 front differential pinion thrust washers.

  2. INSTALL FRONT NO. 1 DIFFERENTIAL PINION SHAFT

    1. Coat the front No. 1 differential pinion shaft with MP grease.

    2. Install the front No. 1 differential pinion shaft into the front differential case so that the hole for the front differential pinion shaft straight pin is aligned with the hole in the front differential case.

      A012KDR
  3. INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH

    Click hereНажмите здесь

  4. INSTALL FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

    1. Using a 5 mm pin punch and a hammer, install the front differential pinion shaft straight pin into the front differential case.

      A012NCS
    2. Using a chisel and hammer, stake the front differential case hole.

      A012J3B