МАСЛО ДЛЯ МЕХАНИЧЕСКИХ ТРАНСМИССИЙ ЗАМЕНА

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereНажмите здесь

  2. REMOVE REAR ENGINE UNDER COVER LH

    Click hereНажмите здесь

  3. DRAIN MANUAL TRANSAXLE OIL

    1. Remove the manual transmission filler plug and gasket.

      A012IX0C03
      *1 Manual Transmission Filler Plug
      *2 Manual Transmission Drain Plug
    2. Using a 10 mm hexagon socket wrench, remove the manual transmission drain plug and gasket to drain the manual transaxle oil.

    3. Using a 10 mm hexagon socket wrench, install a new gasket and the manual transmission drain plug.

      Момент затяжки
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }
  4. ADD MANUAL TRANSAXLE OIL

    1. Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      A012LWGC02
      *a 0 to 5 mm
      Manual Transmission Oil
      Toyota Genuine Manual Transmission Gear Oil "LV GL-4 and SAE 75W"or "API GL-4 and SAE 75W"
      Standard Capacity
      2.4 liters (2.5 US qts, 2.1 Imp.qts.)
    2. Install a new gasket and the manual transmission filler plug.

      Момент затяжки
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }
      Note:
      • When adding manual transaxle oil, make sure that the vehicle is level.

      • An excessively large or small amount of manual transaxle oil may cause problems.

      • After adding manual transaxle oil, drive the vehicle and recheck the oil level.

  5. INSPECT FOR OIL LEAK

  6. INSTALL REAR ENGINE UNDER COVER LH

    Click hereНажмите здесь

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click hereНажмите здесь