МАСЛО ДЛЯ МЕХАНИЧЕСКИХ ТРАНСМИССИЙ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    Click hereНажмите здесь

  2. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    Click hereНажмите здесь

  3. REMOVE REAR ENGINE UNDER COVER LH

    Click hereНажмите здесь

  4. INSPECT MANUAL TRANSAXLE OIL

    1. Remove the manual transmission filler plug and gasket.

      A012M9GC01
      *1 Manual Transmission Filler Plug
    2. Check that the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      A012LWGC02
      *a 0 to 5 mm
      Note:

      An excessively large or small amount of manual transaxle oil may cause problems.

    3. Check for oil leakage when the oil level is low.

    4. Install a new gasket and the manual transmission filler plug.

      A012M9GC01
      *1 Manual Transmission Filler Plug
      Момент затяжки
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }
  5. INSTALL REAR ENGINE UNDER COVER LH

    Click hereНажмите здесь

  6. INSTALL NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    Click hereНажмите здесь

  7. INSTALL NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    Click hereНажмите здесь