ПЕДАЛЬ АКСЕЛЕРАТОРА СНЯТИЕ

PROCEDURE

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note:

    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    1. Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 bolts and accelerator pedal sensor assembly.

      A012KAW