ЭБУ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" (для моделей с левосторонним рулевым управлением) УСТАНОВКА

PROCEDURE

  1. INSTALL TCM

    1. Install the TCM to the ECU integration box RH.

  2. INSTALL ECU INTEGRATION BOX RH

    1. Install the ECU integration box RH with the 3 bolts.

      Момент затяжки
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect each connector.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click hereНажмите здесь

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click hereНажмите здесь

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereНажмите здесь

  6. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click hereНажмите здесь

  7. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click hereНажмите здесь

  8. PERFORM SYNCHRONIZATION POSITION CALIBRATION

    Click hereНажмите здесь