ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ УСТАНОВКА

PROCEDURE

  1. INSTALL GENERATOR CONTROL ECU ASSEMBLY

    1. Install the negative (-) battery terminal to the battery and tighten the nut.

      A012MXGC01
      *1 Engine Wire
      *2 Generator Control ECU Assembly
      *3 Negative (-) Battery Terminal
      Момент затяжки
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Install the generator control ECU assembly and nut to the negative (-) battery terminal.

      Момент затяжки
      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

    3. Connect the connector to the generator control ECU assembly.

    4. Connect the engine wire to the generator control ECU assembly and install the nut.

      Момент затяжки
      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }