PROCEDURE
INSPECT FOR INTAKE AIR TEMPERATURE SENSOR
Partially immerse the sensor in water and warm up the water.
*a |
Component without harness connected (Intake Air Temperature Sensor) |
*b | Resistance kΩ |
*c | Temperature °C (°F) | *d | Acceptable Range |
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
When checking the intake air temperature sensor in water, keep the terminals dry. After the check, wipe the intake air temperature sensor dry.
If the result is not as specified, replace the intake air temperature sensor.