PROCEDURE
REMOVE FRONT WHEEL RH
REMOVE NO. 1 ENGINE UNDER COVER
Click hereНажмите здесь
REMOVE REAR ENGINE UNDER COVER RH
Click hereНажмите здесь
REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
Remove the 4 bolts and front suspension member reinforcement RH.
REMOVE V-RIBBED BELT
Using SST and a 22 mm wrench, rotate the V-ribbed belt tensioner assembly counterclockwise to loosen the belt tension. Then remove the V-ribbed belt.
*A | w/o Air Conditioning System | *B | w/ Air Conditioning System |
*1 | 22 mm wrench | - | - |
ОСТОРОЖНО
Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.
Be careful that your hands do not become jammed between parts such as the V-ribbed belt, pulleys, etc.
Make sure SST is installed as shown in the illustration. If not, SST and/or the V-ribbed belt may not be able to be removed.