PROCEDURE
INSTALL SHIFT PADDLE SWITCH
Connect the 2 shift paddle switch connectors.
Install a new 2 band clamps as shown in the illustration.
*a | Band Clamp |
*b | 0 to 40° |
*c | 1 to 3 mm (0.0394 to 0.118 in.) |
*d | Shift Paddle Switch Connector |
Engage the 3 clamps to install the No. 1 switch wire with the 2 shift paddle switches.
Install the 2 shift paddle switches with the 2 screws.
INSTALL STEERING PAD SWITCH ASSEMBLY
Click here Нажмите здесь
INSTALL STEERING WHEEL ASSEMBLY
Click here Нажмите здесь