ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ СНЯТИЕ

PROCEDURE

  1. REMOVE GENERATOR CONTROL ECU ASSEMBLY

    1. Remove the nut and disconnect the engine wire from the generator control ECU assembly.

      A012H9WC01
      *1 Engine Wire
      *2 Generator Control ECU Assembly
      *3 Negative (-) Battery Terminal

    2. Disconnect the connector from the generator control ECU assembly.

    3. Remove the nut and generator control ECU assembly from the negative (-) battery terminal.

    4. Loosen the nut and remove the negative (-) battery terminal from the battery.