ВАЛ РЫЧАГА ВЫБОРА И ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ РАЗБОРКА

PROCEDURE

  1. REMOVE INNER NO. 2 SHIFT LEVER

    1. Using a 5 mm pin punch and a hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.

      A012GHF
      Tip:

      Check the orientation of the inner No. 2 shift lever.

  2. REMOVE RELEASE HEAD STRAIGHT PIN

    1. Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the select stopper block.

      A012KZL
    2. Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the front inner shift lever.

      A012GG7
    3. Turn the release head clockwise.

      A012KBC
    4. Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.

      A012FPH
  3. REMOVE SELECT STOPPER BLOCK

    1. Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.

      A012FRC
      Tip:

      Check the orientation of the front inner shift lever, release head torsion spring, release head and select stopper block.