ДАТЧИК ПОЛОЖЕНИЯ РАСПРЕДВАЛА СНЯТИЕ

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь

  2. SEPARATE SENSOR BRACKET (w/o Stop And Start System)

    1. Disconnect the connector from the differential pressure sensor.

      A012HUE

    2. Remove the nut and separate the sensor bracket from the cylinder head cover sub-assembly.

      A012HXT

  3. REMOVE NO. 1 CRANK POSITION SENSOR (w/o Stop And Start System)

    1. Disconnect the connector from the No. 1 crank position sensor.

      A012GJB

    2. Remove the bolt and No. 1 crank position sensor from the cylinder head cover sub-assembly.

      A012KN8

  4. REMOVE NO. 1 CRANK POSITION SENSOR (w/ Stop And Start System)

    1. Disconnect the connector from the No. 1 crank position sensor.

      A012GOA

    2. Remove the bolt and No. 1 crank position sensor from the timing chain cover sub-assembly.