ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ УСТАНОВКА

PROCEDURE

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    1. Install a new gasket to the engine coolant temperature sensor.

    2. Using a 19 mm socket wrench, install the engine coolant temperature sensor onto the cylinder head sub-assembly.

      Момент затяжки
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }
      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

    3. Connect the connector of the engine coolant temperature sensor.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click hereНажмите здесь

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click hereНажмите здесь

  4. ADD ENGINE COOLANT

    Click hereНажмите здесь

  5. INSPECT FOR COOLANT LEAK

    Click hereНажмите здесь

  6. INSTALL NO. 1 ENGINE COVER

    Click hereНажмите здесь