СИСТЕМА ЗАРЯДКИ АККУМУЛЯТОРНОЙ БАТАРЕИ ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

*: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT
    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    Tip:
    • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

    • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

    The following 5 items are important points for problem analysis:

    What Vehicle model, system name
    When Date, time, occurrence frequency
    Where Road conditions
    Under what conditions? Running conditions, driving conditions, weather conditions
    How did it happen? Problem symptoms
    Result
    Proceed to
    NEXT
    NEXT
  3. INSPECT BATTERY VOLTAGE

    Standard Voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    Result
    Proceed to
    NEXT
    NEXT
  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Check if CAN communication DTCs are output.

      Click here Нажмите здесь

      Result
      Result Proceed to
      CAN communication DTCs are not output. A
      CAN communication DTCs are output. B
    B

    GO TO CAN COMMUNICATION SYSTEM Click hereНажмите здесь


    A
  5. CHECK FOR DTC*

    Tip:

    Refer to DTC Check / Clear.

    Click hereНажмите здесь

    Result
    Result Proceed to
    DTCs are not output. A
    DTCs are output. B
    B

    GO TO DTC CHART Click hereНажмите здесь


    A
  6. REFER TO PROBLEM SYMPTOMS TABLE

    Tip:

    Refer to Problem Symptoms Table.

    Click hereНажмите здесь

    Result
    Result Proceed to
    Malfunctioning parts are not confirmed. A
    Malfunctioning parts are confirmed. B
    B Нажмите здесь

    GO TO STEP 12


    A
  7. OVERALL ANALYSIS AND TROUBLESHOOTING*

    Tip:

    Refer to Data List / Active Test.

    Click hereНажмите здесь

    Result
    Result Proceed to
    Malfunctioning parts are not confirmed. A
    Malfunctioning parts are confirmed. B
    B Нажмите здесь

    GO TO STEP 12


    A
  8. CHECK ECU CIRCUIT

    Tip:

    Refer to Terminals of ECU.

    Click hereНажмите здесь

    Result
    Result
    OK
    NG
    NG Нажмите здесь

    GO TO STEP 12


    OK
  9. CHECK FOR INTERMITTENT PROBLEMS

    Tip:

    Refer to Symptom Simulation.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT
  10. CONDUCT PARTS INSPECTION

    Result
    Proceed to
    NEXT
    NEXT
  11. IDENTIFY PROBLEM

    Result
    Proceed to
    NEXT
    NEXT
  12. ADJUST AND/OR REPAIR

    Result
    Proceed to
    NEXT
    NEXT
  13. CONDUCT CONFIRMATION TEST

    Result
    Proceed to
    NEXT
    NEXT

    END