ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ ПРОВЕРКА

PROCEDURE

  1. INSPECT AIR FUEL RATIO SENSOR

    1. Measure the resistance according to the value(s) in the table below.

      A012K0PC01
      *a

      Component without harness connected

      (Air Fuel Ratio Sensor)
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (HAF2) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
      1 (HAF2) - 4 (AF2-) - 10 kΩ or higher
      Tip:

      The temperature indicated in "Condition" is the temperature of the air fuel ratio sensor.

      If the result is not as specified, replace the air fuel ratio sensor.