ЭБУ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" (для моделей с правосторонним рулевым управлением) УСТАНОВКА

PROCEDURE

  1. INSTALL TCM

    1. Install the TCM to the body with the 2 bolts.

      Момент затяжки
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 4 connectors to the TCM.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click hereНажмите здесь

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click hereНажмите здесь

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereНажмите здесь

  5. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click hereНажмите здесь

  6. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click hereНажмите здесь

  7. PERFORM SYNCHRONIZATION POSITION CALIBRATION

    Click hereНажмите здесь