ПРИВОДНОЙ РЕМЕНЬ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE

  1. INSPECT V-RIBBED BELT

    1. Check the belt for wear, cracks or other signs of damage.

      A012IPT

      If any of the following defects is found, replace the V-ribbed belt.

      • The V-ribbed belt is cracked.

      • The V-ribbed belt is worn to the extent that the cords are exposed.

      • The V-ribbed belt has chunks missing from the ribs.

    2. Check that the V-ribbed belt fits properly in the ribbed grooves.

      A012FIPC03
      *a Correct
      *b Incorrect
      Tip:

      Check with your hand to confirm that the V-ribbed belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.

  2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

    1. Check that nothing gets caught on the V-ribbed belt tensioner assembly by rotating it clockwise and counterclockwise.

      If any abnormalihes are found, replace the V-ribbed belt tensioner assembly.

      A012FAG