ДАТЧИК АБСОЛЮТНОГО ДАВЛЕНИЯ В КОЛЛЕКТОРЕ УСТАНОВКА

PROCEDURE

  1. INSTALL DIESEL TURBO PRESSURE SENSOR

    1. Install the diesel turbo pressure sensor with the bolt.

      Момент затяжки
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

      Note:

      • Make sure that the protrusion of the gas filter bracket is inserted into the hole of the sensor.

      • If a component has been dropped or subjected to a strong impact, replace it.

    2. Connect the vacuum hose to the diesel turbo pressure sensor.

    3. Connect the pressure diesel turbo pressure sensor.

  2. CONNECT ENGINE WIRE

    1. Connect the engine wire with the bolt.

      Момент затяжки
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  3. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь