ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ ПРОВЕРКА

PROCEDURE

  1. INSPECT AIR FUEL RATIO SENSOR

    1. Measure the resistance according to the value(s) in the table below.

      A012KN0C05
      *a

      Component without harness connected

      (Air Fuel Ratio Sensor)
      Standard Resistance
      Tester Connection Condition Specified Condition
      5 (H-) - 2 (+B) 20°C (68°F) 2 to 5 Ω
      5 (H-) - 4 (AF1+) Always 10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.