ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ УСТАНОВКА

PROCEDURE

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    1. Install a new gasket to the engine coolant temperature sensor.

    2. Using a 19 mm socket wrench, install the engine coolant temperature sensor onto the cylinder head sub-assembly.

      Момент затяжки
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }
      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

    3. Connect the connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here Нажмите здесь

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here Нажмите здесь

  4. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь

  5. ADD COOLANT

    Click hereНажмите здесь

  6. INSPECT FOR COOLANT LEAK

    Click hereНажмите здесь

  7. INSTALL NO. 1 ENGINE UNDER COVER