СИСТЕМА МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT
    NEXT

  3. CONNECT GTS TO DLC3*

    Tip:

    If the display indicates a communication fault in the tool, inspect the DLC3.

    Result
    Proceed to
    NEXT
    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*

    1. Check for CAN communication system DTCs.

      Click here Нажмите здесь

      Result
      Result Proceed to
      CAN system DTCs are not output A
      CAN system DTCs are output B
      Tip:

      The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, check that there is no trouble in the CAN communication system.

      Click hereНажмите здесь

    B

    PROCEED TO CAN COMMUNICATION SYSTEM Click hereНажмите здесь

    A

  5. CHECK DTC AND FREEZE FRAME DATA*

    Note:

    Record or print DTCs and freeze frame data, if necessary.

    Tip:

    Refer to DTC Check/Clear.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT

  6. CLEAR DTC AND FREEZE FRAME DATA*

    Tip:

    Refer to DTC Check/Clear.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT

  7. VISUAL INSPECTION

    Result
    Proceed to
    NEXT
    NEXT

  8. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B
    B Нажмите здесь

    GO TO STEP 10

    A

  9. SYMPTOM SIMULATION

    Tip:

    Refer to the relevant pages.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT

  10. DTC CHECK*

    Tip:

    Refer to DTC Check/Clear.

    Click hereНажмите здесь

    Result
    Result Proceed to
    DTCs are output A
    DTCs are not output B
    B Нажмите здесь

    A

  11. DTC CHART

    Tip:

    Refer to Diagnostic Trouble Code Chart.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT

  12. CIRCUIT INSPECTION

    Result
    Proceed to
    NEXT
    NEXT

  13. IDENTIFICATION OF PROBLEM

    Result
    Proceed to
    NEXT
    NEXT

  14. ADJUSTMENT, PEPAIR OR REPLACEMENT

    Result
    Proceed to
    NEXT
    NEXT

  15. CONFIRMATION TEST

    Result
    Proceed to
    NEXT
    NEXT

    END

  16. PROBLEM SYMPTOMS TABLE

    Tip:

    Refer to Problem Symptoms Table.

    Click here Нажмите здесь

    Result
    Proceed to
    NEXT
    NEXT

  17. PART INSPECTION

    Result
    Proceed to
    NEXT
    NEXT Нажмите здесь

    GO TO STEP 14