ЭБУ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" (для моделей с левосторонним рулевым управлением) УСТАНОВКА

PROCEDURE

1. INSTALL TCM

   Install the TCM to the ECU integration box RH.

2. INSTALL ECU INTEGRATION BOX RH

   Install the ECU integration box RH with the 3 bolts.

   Момент затяжки

   12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Hatchback)

   Click hereНажмите здесь

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Sedan)

   Click hereНажмите здесь

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

   for Hatchback:

   Click hereНажмите здесь

   for Sedan:

   Click hereНажмите здесь

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereНажмите здесь

7. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click hereНажмите здесь

8. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click hereНажмите здесь

9. PERFORM SYNCHRONIZATION POSITION CALIBRATION

   Click hereНажмите здесь