ДАТЧИК МАССОВОГО РАСХОДА ВОЗДУХА ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE

  1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY

    1. Check the mass air flow value.

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / MAF.

        Powertrain > Engine and ECT > Data List
        Tester Display
        MAF

      5. Blow air into the MAF meter and check that the MAF value fluctuates.

        If the result is not as specified, check the MAF meter, or wiring and ECM.

        A012F79

        Click hereНажмите здесь