ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА

PROCEDURE

  1. INSTALL INTAKE AIR TEMPERATURE SENSOR

    1. Install a new gasket to the intake air temperature sensor.

    2. Using a 22 mm socket wrench, install the intake air temperature sensor onto the No. 2 air tube assembly.

      Момент затяжки
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }
      Note:

      If a component has been dropped or subjected to a strong impact, replace it.

    3. Connect the connector to the intake air temperature sensor.

  2. INSTALL NO. 3 AIR HOSE

    Click here Нажмите здесь

  3. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь