PROCEDURE
REMOVE NO. 1 ENGINE UNDER COVER
Click hereНажмите здесь
REMOVE REAR ENGINE UNDER COVER LH
Click hereНажмите здесь
DRAIN MANUAL TRANSAXLE OIL
Remove the manual transmission filler plug and gasket.
*1 | Manual Transmission Filler Plug |
*2 | Manual Transmission Drain Plug |
Using a 10 mm hexagon socket wrench, remove the manual transmission drain plug and gasket to drain the manual transaxle oil.
Using a 10 mm hexagon socket wrench, install a new gasket and the manual transmission drain plug.
ADD MANUAL TRANSAXLE OIL
Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the transmission filler plug opening.
*a | 0 to 5 mm |
Manual Transaxle Oil |
---|
Toyota Genuine Manual Transmission Gear Oil "LV GL-4 and SAE 75W" or "API GL-4 and SAE 75W" |
Standard Capacity |
---|
2.4 liters (2.5 US qts, 2.1 Imp.qts.) |
Install a new gasket and the transmission filler plug.
When adding manual transaxle oil, make sure that the vehicle is level.
An excessively large or small amount of manual transaxle oil may cause problems.
After adding manual transaxle oil, drive the vehicle and recheck the oil level.
INSPECT FOR OIL LEAK
INSTALL REAR ENGINE UNDER COVER LH
Click hereНажмите здесь
INSTALL NO. 1 ENGINE UNDER COVER
Click hereНажмите здесь