CAUTION / NOTICE / HINT
Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than the other belts with PET (polyester) or PEN (polyethylene naphthalate) core.
PROCEDURE
REMOVE FRONT WHEEL RH
REMOVE NO. 1 ENGINE UNDER COVER
Remove the 6 bolts, 11 clips and No. 1 engine under cover.
REMOVE REAR ENGINE UNDER COVER RH
Click hereНажмите здесь
REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)
Click hereНажмите здесь
REMOVE V-RIBBED BELT
Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner assembly.
While turning the V-ribbed belt tensioner assembly counterclockwise, align the holes, and then insert a 5 mm hexagon wrench into the holes to fix the V-ribbed belt tensioner assembly.
*a | 5 mm Hexagon Wrench |