РАБОЧИЙ ЦИЛИНДР СЦЕПЛЕНИЯ (для моделей с EA66) РАЗБОРКА

PROCEDURE

  1. REMOVE RELEASE CYLINDER BLEEDER PLUG

    1. Remove the bleeder plug cap from the release cylinder bleeder plug.

    2. Remove the release cylinder bleeder plug from the clutch release cylinder body.

  2. REMOVE CLUTCH RELEASE CYLINDER KIT

    1. Remove the boot from the clutch release cylinder body.

      A012KQHC01
      *1 Spring
      *2 Piston
      *3 Push Rod
      *4 Boot
    2. Remove the push rod from the clutch release cylinder body.

    3. Remove the piston and spring from the clutch release cylinder body.

      Note:

      Do not damage the inside of the clutch release cylinder body.